639 lines
25 KiB
C
639 lines
25 KiB
C
// Copyright (C) 2009 Ubixum, Inc.
|
|
//
|
|
// This library is free software; you can redistribute it and/or
|
|
// modify it under the terms of the GNU Lesser General Public
|
|
// License as published by the Free Software Foundation; either
|
|
// version 2.1 of the License, or (at your option) any later version.
|
|
//
|
|
// This library is distributed in the hope that it will be useful,
|
|
// but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
// Lesser General Public License for more details.
|
|
//
|
|
// You should have received a copy of the GNU Lesser General Public
|
|
// License along with this library; if not, write to the Free Software
|
|
// Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
/*! \file
|
|
*
|
|
* This is the basic header/register file for working with the cypress fx2
|
|
* (cyc768013) and variants 8051 chipset. It contains the special function
|
|
* register definitions as well as the special configuration registers
|
|
* addresses.
|
|
*
|
|
* The TRM for the fx2 chip contains the full documentation for what each of
|
|
* these registers do.
|
|
*
|
|
* */
|
|
|
|
|
|
/** \mainpage FX2LIB Documentation
|
|
* \verbinclude README
|
|
**/
|
|
|
|
/** \example fw.c
|
|
* The firmware framework allows for easily beginning a new firware project.
|
|
**/
|
|
|
|
#ifndef FX2REGS_H
|
|
#define FX2REGS_H
|
|
|
|
#include "fx2types.h"
|
|
|
|
__xdata __at 0xE400 volatile BYTE GPIF_WAVE_DATA;
|
|
__xdata __at 0xE480 volatile BYTE RES_WAVEDATA_END;
|
|
|
|
// General Configuration
|
|
|
|
__xdata __at 0xE600 volatile BYTE CPUCS; ///< Control & Status
|
|
__xdata __at 0xE601 volatile BYTE IFCONFIG; ///< Interface Configuration
|
|
__xdata __at 0xE602 volatile BYTE PINFLAGSAB; ///< FIFO FLAGA and FLAGB Assignments
|
|
__xdata __at 0xE603 volatile BYTE PINFLAGSCD; ///< FIFO FLAGC and FLAGD Assignments
|
|
__xdata __at 0xE604 volatile BYTE FIFORESET; ///< Restore FIFOS to default state
|
|
__xdata __at 0xE605 volatile BYTE BREAKPT; ///< Breakpoint
|
|
__xdata __at 0xE606 volatile BYTE BPADDRH; ///< Breakpoint Address H
|
|
__xdata __at 0xE607 volatile BYTE BPADDRL; ///< Breakpoint Address L
|
|
__xdata __at 0xE608 volatile BYTE UART230; ///< 230 Kbaud clock for T0,T1,T2
|
|
__xdata __at 0xE609 volatile BYTE FIFOPINPOLAR; ///< FIFO polarities
|
|
__xdata __at 0xE60A volatile BYTE REVID; ///< Chip Revision
|
|
__xdata __at 0xE60B volatile BYTE REVCTL; ///< Chip Revision Control
|
|
|
|
// Endpoint Configuration
|
|
|
|
__xdata __at 0xE610 volatile BYTE EP1OUTCFG; ///< Endpoint 1-OUT Configuration
|
|
__xdata __at 0xE611 volatile BYTE EP1INCFG; ///< Endpoint 1-IN Configuration
|
|
__xdata __at 0xE612 volatile BYTE EP2CFG; ///< Endpoint 2 Configuration
|
|
__xdata __at 0xE613 volatile BYTE EP4CFG; ///< Endpoint 4 Configuration
|
|
__xdata __at 0xE614 volatile BYTE EP6CFG; ///< Endpoint 6 Configuration
|
|
__xdata __at 0xE615 volatile BYTE EP8CFG; ///< Endpoint 8 Configuration
|
|
__xdata __at 0xE618 volatile BYTE EP2FIFOCFG; ///< Endpoint 2 FIFO configuration
|
|
__xdata __at 0xE619 volatile BYTE EP4FIFOCFG; ///< Endpoint 4 FIFO configuration
|
|
__xdata __at 0xE61A volatile BYTE EP6FIFOCFG; ///< Endpoint 6 FIFO configuration
|
|
__xdata __at 0xE61B volatile BYTE EP8FIFOCFG; ///< Endpoint 8 FIFO configuration
|
|
__xdata __at 0xE620 volatile BYTE EP2AUTOINLENH; ///< Endpoint 2 Packet Length H (IN only)
|
|
__xdata __at 0xE621 volatile BYTE EP2AUTOINLENL; ///< Endpoint 2 Packet Length L (IN only)
|
|
__xdata __at 0xE622 volatile BYTE EP4AUTOINLENH; ///< Endpoint 4 Packet Length H (IN only)
|
|
__xdata __at 0xE623 volatile BYTE EP4AUTOINLENL; ///< Endpoint 4 Packet Length L (IN only)
|
|
__xdata __at 0xE624 volatile BYTE EP6AUTOINLENH; ///< Endpoint 6 Packet Length H (IN only)
|
|
__xdata __at 0xE625 volatile BYTE EP6AUTOINLENL; ///< Endpoint 6 Packet Length L (IN only)
|
|
__xdata __at 0xE626 volatile BYTE EP8AUTOINLENH; ///< Endpoint 8 Packet Length H (IN only)
|
|
__xdata __at 0xE627 volatile BYTE EP8AUTOINLENL; ///< Endpoint 8 Packet Length L (IN only)
|
|
__xdata __at 0xE630 volatile BYTE EP2FIFOPFH; ///< EP2 Programmable Flag trigger H
|
|
__xdata __at 0xE631 volatile BYTE EP2FIFOPFL; ///< EP2 Programmable Flag trigger L
|
|
__xdata __at 0xE632 volatile BYTE EP4FIFOPFH; ///< EP4 Programmable Flag trigger H
|
|
__xdata __at 0xE633 volatile BYTE EP4FIFOPFL; ///< EP4 Programmable Flag trigger L
|
|
__xdata __at 0xE634 volatile BYTE EP6FIFOPFH; ///< EP6 Programmable Flag trigger H
|
|
__xdata __at 0xE635 volatile BYTE EP6FIFOPFL; ///< EP6 Programmable Flag trigger L
|
|
__xdata __at 0xE636 volatile BYTE EP8FIFOPFH; ///< EP8 Programmable Flag trigger H
|
|
__xdata __at 0xE637 volatile BYTE EP8FIFOPFL; ///< EP8 Programmable Flag trigger L
|
|
__xdata __at 0xE640 volatile BYTE EP2ISOINPKTS; ///< EP2 (if ISO) IN Packets per frame (1-3)
|
|
__xdata __at 0xE641 volatile BYTE EP4ISOINPKTS; ///< EP4 (if ISO) IN Packets per frame (1-3)
|
|
__xdata __at 0xE642 volatile BYTE EP6ISOINPKTS; ///< EP6 (if ISO) IN Packets per frame (1-3)
|
|
__xdata __at 0xE643 volatile BYTE EP8ISOINPKTS; ///< EP8 (if ISO) IN Packets per frame (1-3)
|
|
__xdata __at 0xE648 volatile BYTE INPKTEND; ///< Force IN Packet End
|
|
__xdata __at 0xE649 volatile BYTE OUTPKTEND; ///< Force OUT Packet End
|
|
|
|
// Interrupts
|
|
|
|
__xdata __at 0xE650 volatile BYTE EP2FIFOIE; ///< Endpoint 2 Flag Interrupt Enable
|
|
__xdata __at 0xE651 volatile BYTE EP2FIFOIRQ; ///< Endpoint 2 Flag Interrupt Request
|
|
__xdata __at 0xE652 volatile BYTE EP4FIFOIE; ///< Endpoint 4 Flag Interrupt Enable
|
|
__xdata __at 0xE653 volatile BYTE EP4FIFOIRQ; ///< Endpoint 4 Flag Interrupt Request
|
|
__xdata __at 0xE654 volatile BYTE EP6FIFOIE; ///< Endpoint 6 Flag Interrupt Enable
|
|
__xdata __at 0xE655 volatile BYTE EP6FIFOIRQ; ///< Endpoint 6 Flag Interrupt Request
|
|
__xdata __at 0xE656 volatile BYTE EP8FIFOIE; ///< Endpoint 8 Flag Interrupt Enable
|
|
__xdata __at 0xE657 volatile BYTE EP8FIFOIRQ; ///< Endpoint 8 Flag Interrupt Request
|
|
__xdata __at 0xE658 volatile BYTE IBNIE; ///< IN-BULK-NAK Interrupt Enable
|
|
__xdata __at 0xE659 volatile BYTE IBNIRQ; ///< IN-BULK-NAK interrupt Request
|
|
__xdata __at 0xE65A volatile BYTE NAKIE; ///< Endpoint Ping NAK interrupt Enable
|
|
__xdata __at 0xE65B volatile BYTE NAKIRQ; ///< Endpoint Ping NAK interrupt Request
|
|
__xdata __at 0xE65C volatile BYTE USBIE; ///< USB Int Enables
|
|
__xdata __at 0xE65D volatile BYTE USBIRQ; ///< USB Interrupt Requests
|
|
__xdata __at 0xE65E volatile BYTE EPIE; ///< Endpoint Interrupt Enables
|
|
__xdata __at 0xE65F volatile BYTE EPIRQ; ///< Endpoint Interrupt Requests
|
|
__xdata __at 0xE660 volatile BYTE GPIFIE; ///< GPIF Interrupt Enable
|
|
__xdata __at 0xE661 volatile BYTE GPIFIRQ; ///< GPIF Interrupt Request
|
|
__xdata __at 0xE662 volatile BYTE USBERRIE; ///< USB Error Interrupt Enables
|
|
__xdata __at 0xE663 volatile BYTE USBERRIRQ; ///< USB Error Interrupt Requests
|
|
__xdata __at 0xE664 volatile BYTE ERRCNTLIM; ///< USB Error counter and limit
|
|
__xdata __at 0xE665 volatile BYTE CLRERRCNT; ///< Clear Error Counter EC[3..0]
|
|
__xdata __at 0xE666 volatile BYTE INT2IVEC; ///< Interupt 2 (USB) Autovector
|
|
__xdata __at 0xE667 volatile BYTE INT4IVEC; ///< Interupt 4 (FIFOS & GPIF) Autovector
|
|
__xdata __at 0xE668 volatile BYTE INTSETUP; ///< Interrupt 2&4 Setup
|
|
|
|
// Input/Output
|
|
|
|
__xdata __at 0xE670 volatile BYTE PORTACFG; ///< I/O PORTA Alternate Configuration
|
|
__xdata __at 0xE671 volatile BYTE PORTCCFG; ///< I/O PORTC Alternate Configuration
|
|
__xdata __at 0xE672 volatile BYTE PORTECFG; ///< I/O PORTE Alternate Configuration
|
|
__xdata __at 0xE678 volatile BYTE I2CS; ///< Control & Status
|
|
__xdata __at 0xE679 volatile BYTE I2DAT; ///< Data
|
|
__xdata __at 0xE67A volatile BYTE I2CTL; ///< I2C Control
|
|
__xdata __at 0xE67B volatile BYTE XAUTODAT1; ///< Autoptr1 MOVX access
|
|
__xdata __at 0xE67C volatile BYTE XAUTODAT2; ///< Autoptr2 MOVX access
|
|
|
|
#define EXTAUTODAT1 XAUTODAT1
|
|
#define EXTAUTODAT2 XAUTODAT2
|
|
|
|
// USB Control
|
|
|
|
__xdata __at 0xE680 volatile BYTE USBCS; ///< USB Control & Status
|
|
__xdata __at 0xE681 volatile BYTE SUSPEND; ///< Put chip into suspend
|
|
__xdata __at 0xE682 volatile BYTE WAKEUPCS; ///< Wakeup source and polarity
|
|
__xdata __at 0xE683 volatile BYTE TOGCTL; ///< Toggle Control
|
|
__xdata __at 0xE684 volatile BYTE USBFRAMEH; ///< USB Frame count H
|
|
__xdata __at 0xE685 volatile BYTE USBFRAMEL; ///< USB Frame count L
|
|
__xdata __at 0xE686 volatile BYTE MICROFRAME; ///< Microframe count, 0-7
|
|
__xdata __at 0xE687 volatile BYTE FNADDR; ///< USB Function address
|
|
|
|
// Endpoints
|
|
|
|
__xdata __at 0xE68A volatile BYTE EP0BCH; ///< Endpoint 0 Byte Count H
|
|
__xdata __at 0xE68B volatile BYTE EP0BCL; ///< Endpoint 0 Byte Count L
|
|
__xdata __at 0xE68D volatile BYTE EP1OUTBC; ///< Endpoint 1 OUT Byte Count
|
|
__xdata __at 0xE68F volatile BYTE EP1INBC; ///< Endpoint 1 IN Byte Count
|
|
__xdata __at 0xE690 volatile BYTE EP2BCH; ///< Endpoint 2 Byte Count H
|
|
__xdata __at 0xE691 volatile BYTE EP2BCL; ///< Endpoint 2 Byte Count L
|
|
__xdata __at 0xE694 volatile BYTE EP4BCH; ///< Endpoint 4 Byte Count H
|
|
__xdata __at 0xE695 volatile BYTE EP4BCL; ///< Endpoint 4 Byte Count L
|
|
__xdata __at 0xE698 volatile BYTE EP6BCH; ///< Endpoint 6 Byte Count H
|
|
__xdata __at 0xE699 volatile BYTE EP6BCL; ///< Endpoint 6 Byte Count L
|
|
__xdata __at 0xE69C volatile BYTE EP8BCH; ///< Endpoint 8 Byte Count H
|
|
__xdata __at 0xE69D volatile BYTE EP8BCL; ///< Endpoint 8 Byte Count L
|
|
__xdata __at 0xE6A0 volatile BYTE EP0CS; ///< Endpoint Control and Status
|
|
__xdata __at 0xE6A1 volatile BYTE EP1OUTCS; ///< Endpoint 1 OUT Control and Status
|
|
__xdata __at 0xE6A2 volatile BYTE EP1INCS; ///< Endpoint 1 IN Control and Status
|
|
__xdata __at 0xE6A3 volatile BYTE EP2CS; ///< Endpoint 2 Control and Status
|
|
__xdata __at 0xE6A4 volatile BYTE EP4CS; ///< Endpoint 4 Control and Status
|
|
__xdata __at 0xE6A5 volatile BYTE EP6CS; ///< Endpoint 6 Control and Status
|
|
__xdata __at 0xE6A6 volatile BYTE EP8CS; ///< Endpoint 8 Control and Status
|
|
__xdata __at 0xE6A7 volatile BYTE EP2FIFOFLGS; ///< Endpoint 2 Flags
|
|
__xdata __at 0xE6A8 volatile BYTE EP4FIFOFLGS; ///< Endpoint 4 Flags
|
|
__xdata __at 0xE6A9 volatile BYTE EP6FIFOFLGS; ///< Endpoint 6 Flags
|
|
__xdata __at 0xE6AA volatile BYTE EP8FIFOFLGS; ///< Endpoint 8 Flags
|
|
__xdata __at 0xE6AB volatile BYTE EP2FIFOBCH; ///< EP2 FIFO total byte count H
|
|
__xdata __at 0xE6AC volatile BYTE EP2FIFOBCL; ///< EP2 FIFO total byte count L
|
|
__xdata __at 0xE6AD volatile BYTE EP4FIFOBCH; ///< EP4 FIFO total byte count H
|
|
__xdata __at 0xE6AE volatile BYTE EP4FIFOBCL; ///< EP4 FIFO total byte count L
|
|
__xdata __at 0xE6AF volatile BYTE EP6FIFOBCH; ///< EP6 FIFO total byte count H
|
|
__xdata __at 0xE6B0 volatile BYTE EP6FIFOBCL; ///< EP6 FIFO total byte count L
|
|
__xdata __at 0xE6B1 volatile BYTE EP8FIFOBCH; ///< EP8 FIFO total byte count H
|
|
__xdata __at 0xE6B2 volatile BYTE EP8FIFOBCL; ///< EP8 FIFO total byte count L
|
|
__xdata __at 0xE6B3 volatile BYTE SUDPTRH; ///< Setup Data Pointer high address byte
|
|
__xdata __at 0xE6B4 volatile BYTE SUDPTRL; ///< Setup Data Pointer low address byte
|
|
__xdata __at 0xE6B5 volatile BYTE SUDPTRCTL; ///< Setup Data Pointer Auto Mode
|
|
__xdata __at 0xE6B8 volatile BYTE SETUPDAT[8]; ///< 8 bytes of SETUP data
|
|
|
|
// GPIF
|
|
|
|
__xdata __at 0xE6C0 volatile BYTE GPIFWFSELECT; ///< Waveform Selector
|
|
__xdata __at 0xE6C1 volatile BYTE GPIFIDLECS; ///< GPIF Done, GPIF IDLE drive mode
|
|
__xdata __at 0xE6C2 volatile BYTE GPIFIDLECTL; ///< Inactive Bus, CTL states
|
|
__xdata __at 0xE6C3 volatile BYTE GPIFCTLCFG; ///< CTL OUT pin drive
|
|
__xdata __at 0xE6C4 volatile BYTE GPIFADRH; ///< GPIF Address H
|
|
__xdata __at 0xE6C5 volatile BYTE GPIFADRL; ///< GPIF Address L
|
|
|
|
__xdata __at 0xE6CE volatile BYTE GPIFTCB3; ///< GPIF Transaction Count Byte 3
|
|
__xdata __at 0xE6CF volatile BYTE GPIFTCB2; ///< GPIF Transaction Count Byte 2
|
|
__xdata __at 0xE6D0 volatile BYTE GPIFTCB1; ///< GPIF Transaction Count Byte 1
|
|
__xdata __at 0xE6D1 volatile BYTE GPIFTCB0; ///< GPIF Transaction Count Byte 0
|
|
|
|
__xdata __at 0xE6D2 volatile BYTE EP2GPIFFLGSEL; ///< EP2 GPIF Flag select
|
|
__xdata __at 0xE6D3 volatile BYTE EP2GPIFPFSTOP; ///< Stop GPIF EP2 transaction on prog. flag
|
|
__xdata __at 0xE6D4 volatile BYTE EP2GPIFTRIG; ///< EP2 FIFO Trigger
|
|
__xdata __at 0xE6DA volatile BYTE EP4GPIFFLGSEL; ///< EP4 GPIF Flag select
|
|
__xdata __at 0xE6DB volatile BYTE EP4GPIFPFSTOP; ///< Stop GPIF EP4 transaction on prog. flag
|
|
__xdata __at 0xE6DC volatile BYTE EP4GPIFTRIG; ///< EP4 FIFO Trigger
|
|
__xdata __at 0xE6E2 volatile BYTE EP6GPIFFLGSEL; ///< EP6 GPIF Flag select
|
|
__xdata __at 0xE6E3 volatile BYTE EP6GPIFPFSTOP; ///< Stop GPIF EP6 transaction on prog. flag
|
|
__xdata __at 0xE6E4 volatile BYTE EP6GPIFTRIG; ///< EP6 FIFO Trigger
|
|
__xdata __at 0xE6EA volatile BYTE EP8GPIFFLGSEL; ///< EP8 GPIF Flag select
|
|
__xdata __at 0xE6EB volatile BYTE EP8GPIFPFSTOP; ///< Stop GPIF EP8 transaction on prog. flag
|
|
__xdata __at 0xE6EC volatile BYTE EP8GPIFTRIG; ///< EP8 FIFO Trigger
|
|
__xdata __at 0xE6F0 volatile BYTE XGPIFSGLDATH; ///< GPIF Data H (16-bit mode only)
|
|
__xdata __at 0xE6F1 volatile BYTE XGPIFSGLDATLX; ///< Read/Write GPIF Data L & trigger transac
|
|
__xdata __at 0xE6F2 volatile BYTE XGPIFSGLDATLNOX; ///< Read GPIF Data L, no transac trigger
|
|
__xdata __at 0xE6F3 volatile BYTE GPIFREADYCFG; ///< Internal RDY,Sync/Async, RDY5CFG
|
|
__xdata __at 0xE6F4 volatile BYTE GPIFREADYSTAT; ///< RDY pin states
|
|
__xdata __at 0xE6F5 volatile BYTE GPIFABORT; ///< Abort GPIF cycles
|
|
|
|
// UDMA
|
|
|
|
__xdata __at 0xE6C6 volatile BYTE FLOWSTATE; ///<Defines GPIF flow state
|
|
__xdata __at 0xE6C7 volatile BYTE FLOWLOGIC; ///<Defines flow/hold decision criteria
|
|
__xdata __at 0xE6C8 volatile BYTE FLOWEQ0CTL; ///<CTL states during active flow state
|
|
__xdata __at 0xE6C9 volatile BYTE FLOWEQ1CTL; ///<CTL states during hold flow state
|
|
__xdata __at 0xE6CA volatile BYTE FLOWHOLDOFF;
|
|
__xdata __at 0xE6CB volatile BYTE FLOWSTB; ///<CTL/RDY Signal to use as master data strobe
|
|
__xdata __at 0xE6CC volatile BYTE FLOWSTBEDGE; ///<Defines active master strobe edge
|
|
__xdata __at 0xE6CD volatile BYTE FLOWSTBHPERIOD; ///<Half Period of output master strobe
|
|
__xdata __at 0xE60C volatile BYTE GPIFHOLDAMOUNT; ///<Data delay shift
|
|
__xdata __at 0xE67D volatile BYTE UDMACRCH; ///<CRC Upper byte
|
|
__xdata __at 0xE67E volatile BYTE UDMACRCL; ///<CRC Lower byte
|
|
__xdata __at 0xE67F volatile BYTE UDMACRCQUAL; ///<UDMA In only, host terminated use only
|
|
|
|
// Endpoint Buffers
|
|
|
|
__xdata __at 0xE740 volatile BYTE EP0BUF[64]; ///< EP0 IN-OUT buffer
|
|
__xdata __at 0xE780 volatile BYTE EP1OUTBUF[64]; ///< EP1-OUT buffer
|
|
__xdata __at 0xE7C0 volatile BYTE EP1INBUF[64]; ///< EP1-IN buffer
|
|
__xdata __at 0xF000 volatile BYTE EP2FIFOBUF[1024]; ///< 512/1024-byte EP2 buffer (IN or OUT)
|
|
__xdata __at 0xF400 volatile BYTE EP4FIFOBUF[1024]; ///< 512 byte EP4 buffer (IN or OUT)
|
|
__xdata __at 0xF800 volatile BYTE EP6FIFOBUF[1024]; ///< 512/1024-byte EP6 buffer (IN or OUT)
|
|
__xdata __at 0xFC00 volatile BYTE EP8FIFOBUF[1024]; ///< 512 byte EP8 buffer (IN or OUT)
|
|
|
|
// Error Correction Code (ECC) Registers (FX2LP/FX1 only)
|
|
|
|
__xdata __at 0xE628 volatile BYTE ECCCFG; ///< ECC Configuration
|
|
__xdata __at 0xE629 volatile BYTE ECCRESET; ///< ECC Reset
|
|
__xdata __at 0xE62A volatile BYTE ECC1B0; ///< ECC1 Byte 0
|
|
__xdata __at 0xE62B volatile BYTE ECC1B1; ///< ECC1 Byte 1
|
|
__xdata __at 0xE62C volatile BYTE ECC1B2; ///< ECC1 Byte 2
|
|
__xdata __at 0xE62D volatile BYTE ECC2B0; ///< ECC2 Byte 0
|
|
__xdata __at 0xE62E volatile BYTE ECC2B1; ///< ECC2 Byte 1
|
|
__xdata __at 0xE62F volatile BYTE ECC2B2; ///< ECC2 Byte 2
|
|
|
|
// Feature Registers (FX2LP/FX1 only)
|
|
__xdata __at 0xE50D volatile BYTE GPCR2; ///< Chip Features
|
|
|
|
/**
|
|
* SFRs below
|
|
* According to TRM 15.2, only rows 0 and 8 of the SFRs are bit addressible
|
|
* row 0: IOA, IOB, IOC, IOD, SCON1, PSW, ACC, B
|
|
* row 8: TCON, SCON0, IE, IP, T2CON, IECON, EIE, EIP
|
|
*
|
|
* All others have to move a byte to the SRF address
|
|
**/
|
|
|
|
__sfr __at 0x80 IOA;
|
|
/* IOA */
|
|
__sbit __at 0x80 + 0 PA0;
|
|
__sbit __at 0x80 + 1 PA1;
|
|
__sbit __at 0x80 + 2 PA2;
|
|
__sbit __at 0x80 + 3 PA3;
|
|
__sbit __at 0x80 + 4 PA4;
|
|
__sbit __at 0x80 + 5 PA5;
|
|
__sbit __at 0x80 + 6 PA6;
|
|
__sbit __at 0x80 + 7 PA7;
|
|
__sfr __at 0x81 SP;
|
|
__sfr __at 0x82 DPL;
|
|
__sfr __at 0x83 DPH;
|
|
__sfr __at 0x84 DPL1;
|
|
__sfr __at 0x85 DPH1;
|
|
__sfr __at 0x86 DPS;
|
|
__sfr __at 0x87 PCON;
|
|
__sfr __at 0x88 TCON;
|
|
/* TCON */
|
|
__sbit __at 0x88 + 0 IT0;
|
|
__sbit __at 0x88 + 1 IE0;
|
|
__sbit __at 0x88 + 2 IT1;
|
|
__sbit __at 0x88 + 3 IE1;
|
|
__sbit __at 0x88 + 4 TR0;
|
|
__sbit __at 0x88 + 5 TF0;
|
|
__sbit __at 0x88 + 6 TR1;
|
|
__sbit __at 0x88 + 7 TF1;
|
|
__sfr __at 0x89 TMOD;
|
|
__sfr __at 0x8A TL0;
|
|
__sfr __at 0x8B TL1;
|
|
__sfr __at 0x8C TH0;
|
|
__sfr __at 0x8D TH1;
|
|
__sfr __at 0x8E CKCON;
|
|
__sfr __at 0x90 IOB;
|
|
/* IOB */
|
|
__sbit __at 0x90 + 0 PB0;
|
|
__sbit __at 0x90 + 1 PB1;
|
|
__sbit __at 0x90 + 2 PB2;
|
|
__sbit __at 0x90 + 3 PB3;
|
|
__sbit __at 0x90 + 4 PB4;
|
|
__sbit __at 0x90 + 5 PB5;
|
|
__sbit __at 0x90 + 6 PB6;
|
|
__sbit __at 0x90 + 7 PB7;
|
|
__sfr __at 0x91 EXIF;
|
|
|
|
//__sfr __at 0x92 MPAGE;
|
|
__sfr __at 0x92 _XPAGE; // same as MPAGE for pdata __sfr access w/ sdcc
|
|
__sfr __at 0x98 SCON0;
|
|
/* SCON0 */
|
|
__sbit __at 0x98 + 0 RI;
|
|
__sbit __at 0x98 + 1 TI;
|
|
__sbit __at 0x98 + 2 RB8;
|
|
__sbit __at 0x98 + 3 TB8;
|
|
__sbit __at 0x98 + 4 REN;
|
|
__sbit __at 0x98 + 5 SM2;
|
|
__sbit __at 0x98 + 6 SM1;
|
|
__sbit __at 0x98 + 7 SM0;
|
|
__sfr __at 0x99 SBUF0;
|
|
|
|
__sfr __at 0x9A AUTOPTRH1;
|
|
__sfr __at 0x9B AUTOPTRL1;
|
|
__sfr __at 0x9D AUTOPTRH2;
|
|
__sfr __at 0x9E AUTOPTRL2;
|
|
|
|
__sfr __at 0xA0 IOC;
|
|
/* IOC */
|
|
__sbit __at 0xA0 + 0 PC0;
|
|
__sbit __at 0xA0 + 1 PC1;
|
|
__sbit __at 0xA0 + 2 PC2;
|
|
__sbit __at 0xA0 + 3 PC3;
|
|
__sbit __at 0xA0 + 4 PC4;
|
|
__sbit __at 0xA0 + 5 PC5;
|
|
__sbit __at 0xA0 + 6 PC6;
|
|
__sbit __at 0xA0 + 7 PC7;
|
|
__sfr __at 0xA1 INT2CLR;
|
|
__sfr __at 0xA2 INT4CLR;
|
|
|
|
__sfr __at 0xA8 IE;
|
|
/* IE */
|
|
__sbit __at 0xA8 + 0 EX0;
|
|
__sbit __at 0xA8 + 1 ET0;
|
|
__sbit __at 0xA8 + 2 EX1;
|
|
__sbit __at 0xA8 + 3 ET1;
|
|
__sbit __at 0xA8 + 4 ES0;
|
|
__sbit __at 0xA8 + 5 ET2;
|
|
__sbit __at 0xA8 + 6 ES1;
|
|
__sbit __at 0xA8 + 7 EA;
|
|
|
|
__sfr __at 0xAA EP2468STAT;
|
|
__sfr __at 0xAB EP24FIFOFLGS;
|
|
__sfr __at 0xAC EP68FIFOFLGS;
|
|
__sfr __at 0xAF AUTOPTRSETUP;
|
|
__sfr __at 0xB0 IOD;
|
|
/* IOD */
|
|
__sbit __at 0xB0 + 0 PD0;
|
|
__sbit __at 0xB0 + 1 PD1;
|
|
__sbit __at 0xB0 + 2 PD2;
|
|
__sbit __at 0xB0 + 3 PD3;
|
|
__sbit __at 0xB0 + 4 PD4;
|
|
__sbit __at 0xB0 + 5 PD5;
|
|
__sbit __at 0xB0 + 6 PD6;
|
|
__sbit __at 0xB0 + 7 PD7;
|
|
__sfr __at 0xB1 IOE;
|
|
__sfr __at 0xB2 OEA;
|
|
__sfr __at 0xB3 OEB;
|
|
__sfr __at 0xB4 OEC;
|
|
__sfr __at 0xB5 OED;
|
|
__sfr __at 0xB6 OEE;
|
|
|
|
__sfr __at 0xB8 IP;
|
|
/* IP */
|
|
__sbit __at 0xB8 + 0 PX0;
|
|
__sbit __at 0xB8 + 1 PT0;
|
|
__sbit __at 0xB8 + 2 PX1;
|
|
__sbit __at 0xB8 + 3 PT1;
|
|
__sbit __at 0xB8 + 4 PS0;
|
|
__sbit __at 0xB8 + 5 PT2;
|
|
__sbit __at 0xB8 + 6 PS1;
|
|
|
|
__sfr __at 0xBA EP01STAT;
|
|
__sfr __at 0xBB GPIFTRIG;
|
|
|
|
__sfr __at 0xBD GPIFSGLDATH;
|
|
__sfr __at 0xBE GPIFSGLDATLX;
|
|
__sfr __at 0xBF GPIFSGLDATLNOX;
|
|
|
|
__sfr __at 0xC0 SCON1;
|
|
/* SCON1 */
|
|
__sbit __at 0xC0 + 0 RI1;
|
|
__sbit __at 0xC0 + 1 TI1;
|
|
__sbit __at 0xC0 + 2 RB81;
|
|
__sbit __at 0xC0 + 3 TB81;
|
|
__sbit __at 0xC0 + 4 REN1;
|
|
__sbit __at 0xC0 + 5 SM21;
|
|
__sbit __at 0xC0 + 6 SM11;
|
|
__sbit __at 0xC0 + 7 SM01;
|
|
__sfr __at 0xC1 SBUF1;
|
|
__sfr __at 0xC8 T2CON;
|
|
/* T2CON */
|
|
__sbit __at 0xC8 + 0 CP_RL2;
|
|
__sbit __at 0xC8 + 1 C_T2;
|
|
__sbit __at 0xC8 + 2 TR2;
|
|
__sbit __at 0xC8 + 3 EXEN2;
|
|
__sbit __at 0xC8 + 4 TCLK;
|
|
__sbit __at 0xC8 + 5 RCLK;
|
|
__sbit __at 0xC8 + 6 EXF2;
|
|
__sbit __at 0xC8 + 7 TF2;
|
|
__sfr __at 0xCA RCAP2L;
|
|
__sfr __at 0xCB RCAP2H;
|
|
__sfr __at 0xCC TL2;
|
|
__sfr __at 0xCD TH2;
|
|
__sfr __at 0xD0 PSW;
|
|
/* PSW */
|
|
__sbit __at 0xD0 + 0 P;
|
|
__sbit __at 0xD0 + 1 FL;
|
|
__sbit __at 0xD0 + 2 OV;
|
|
__sbit __at 0xD0 + 3 RS0;
|
|
__sbit __at 0xD0 + 4 RS1;
|
|
__sbit __at 0xD0 + 5 F0;
|
|
__sbit __at 0xD0 + 6 AC;
|
|
__sbit __at 0xD0 + 7 CY;
|
|
__sfr __at 0xD8 EICON; // Was WDCON in DS80C320; Bit Values differ from Reg320
|
|
/* EICON */
|
|
__sbit __at 0xD8 + 3 INT6;
|
|
__sbit __at 0xD8 + 4 RESI;
|
|
__sbit __at 0xD8 + 5 ERESI;
|
|
__sbit __at 0xD8 + 7 SMOD1;
|
|
__sfr __at 0xE0 ACC;
|
|
__sfr __at 0xE8 EIE; // EIE Bit Values differ from Reg320
|
|
/* EIE */
|
|
__sbit __at 0xE8 + 0 EUSB;
|
|
__sbit __at 0xE8 + 1 EI2C;
|
|
__sbit __at 0xE8 + 2 EIEX4;
|
|
__sbit __at 0xE8 + 3 EIEX5;
|
|
__sbit __at 0xE8 + 4 EIEX6;
|
|
__sfr __at 0xF0 B;
|
|
__sfr __at 0xF8 EIP; // EIP Bit Values differ from Reg320
|
|
/* EIP */
|
|
__sbit __at 0xF8 + 0 PUSB;
|
|
__sbit __at 0xF8 + 1 PI2C;
|
|
__sbit __at 0xF8 + 2 EIPX4;
|
|
__sbit __at 0xF8 + 3 EIPX5;
|
|
__sbit __at 0xF8 + 4 EIPX6;
|
|
|
|
|
|
/* CPU Control & Status Register (CPUCS) */
|
|
#define bmPRTCSTB bmBIT5
|
|
#define bmCLKSPD (bmBIT4 | bmBIT3)
|
|
#define bmCLKSPD1 bmBIT4
|
|
#define bmCLKSPD0 bmBIT3
|
|
#define bmCLKINV bmBIT2
|
|
#define bmCLKOE bmBIT1
|
|
#define bm8051RES bmBIT0
|
|
/* Port Alternate Configuration Registers */
|
|
/* Port A (PORTACFG) */
|
|
#define bmFLAGD bmBIT7
|
|
#define bmSLCS bmBIT6
|
|
#define bmINT1 bmBIT1
|
|
#define bmINT0 bmBIT0
|
|
/* Port C (PORTCCFG) */
|
|
#define bmGPIFA7 bmBIT7
|
|
#define bmGPIFA6 bmBIT6
|
|
#define bmGPIFA5 bmBIT5
|
|
#define bmGPIFA4 bmBIT4
|
|
#define bmGPIFA3 bmBIT3
|
|
#define bmGPIFA2 bmBIT2
|
|
#define bmGPIFA1 bmBIT1
|
|
#define bmGPIFA0 bmBIT0
|
|
/* Port E (PORTECFG) */
|
|
#define bmGPIFA8 bmBIT7
|
|
#define bmT2EX bmBIT6
|
|
#define bmINT6 bmBIT5
|
|
#define bmRXD1OUT bmBIT4
|
|
#define bmRXD0OUT bmBIT3
|
|
#define bmT2OUT bmBIT2
|
|
#define bmT1OUT bmBIT1
|
|
#define bmT0OUT bmBIT0
|
|
|
|
/* I2C Control & Status Register (I2CS) */
|
|
#define bmSTART bmBIT7
|
|
#define bmSTOP bmBIT6
|
|
#define bmLASTRD bmBIT5
|
|
#define bmID (bmBIT4 | bmBIT3)
|
|
#define bmBERR bmBIT2
|
|
#define bmACK bmBIT1
|
|
#define bmDONE bmBIT0
|
|
/* I2C Control Register (I2CTL) */
|
|
#define bmSTOPIE bmBIT1
|
|
#define bm400KHZ bmBIT0
|
|
/* Interrupt 2 (USB) Autovector Register (INT2IVEC) */
|
|
#define bmIV4 bmBIT6
|
|
#define bmIV3 bmBIT5
|
|
#define bmIV2 bmBIT4
|
|
#define bmIV1 bmBIT3
|
|
#define bmIV0 bmBIT2
|
|
/* USB Interrupt Request & Enable Registers (USBIE/USBIRQ) */
|
|
#define bmEP0ACK bmBIT6
|
|
#define bmHSGRANT bmBIT5
|
|
#define bmURES bmBIT4
|
|
#define bmSUSP bmBIT3
|
|
#define bmSUTOK bmBIT2
|
|
#define bmSOF bmBIT1
|
|
#define bmSUDAV bmBIT0
|
|
/* USBERRIE/IRQ */
|
|
#define bmERRLIMIT bmBIT0
|
|
#define bmISOEP2 bmBIT4
|
|
#define bmISOEP4 bmBIT5
|
|
#define bmISOEP6 bmBIT6
|
|
#define bmISOEP8 bmBIT7
|
|
|
|
/* Endpoint Interrupt & Enable Registers (EPIE/EPIRQ) */
|
|
#define bmEP0IN bmBIT0
|
|
#define bmEP0OUT bmBIT1
|
|
#define bmEP1IN bmBIT2
|
|
#define bmEP1OUT bmBIT3
|
|
#define bmEP2 bmBIT4
|
|
#define bmEP4 bmBIT5
|
|
#define bmEP6 bmBIT6
|
|
#define bmEP8 bmBIT7
|
|
/* Breakpoint register (BREAKPT) */
|
|
#define bmBREAK bmBIT3
|
|
#define bmBPPULSE bmBIT2
|
|
#define bmBPEN bmBIT1
|
|
/* Interrupt 2 & 4 Setup (INTSETUP) */
|
|
#define bmAV2EN bmBIT3
|
|
#define INT4IN bmBIT1
|
|
#define bmAV4EN bmBIT0
|
|
/* USB Control & Status Register (USBCS) */
|
|
#define bmHSM bmBIT7
|
|
#define bmDISCON bmBIT3
|
|
#define bmNOSYNSOF bmBIT2
|
|
#define bmRENUM bmBIT1
|
|
#define bmSIGRESUME bmBIT0
|
|
/* Wakeup Control and Status Register (WAKEUPCS) */
|
|
#define bmWU2 bmBIT7
|
|
#define bmWU bmBIT6
|
|
#define bmWU2POL bmBIT5
|
|
#define bmWUPOL bmBIT4
|
|
#define bmDPEN bmBIT2
|
|
#define bmWU2EN bmBIT1
|
|
#define bmWUEN bmBIT0
|
|
/* End Point 0 Control & Status Register (EP0CS) */
|
|
#define bmHSNAK bmBIT7
|
|
/* End Point 0-1 Control & Status Registers (EP0CS/EP1OUTCS/EP1INCS) */
|
|
#define bmEPBUSY bmBIT1
|
|
#define bmEPSTALL bmBIT0
|
|
/* End Point 2-8 Control & Status Registers (EP2CS/EP4CS/EP6CS/EP8CS) */
|
|
#define bmNPAK (bmBIT6 | bmBIT5 | bmBIT4)
|
|
#define bmEPFULL bmBIT3
|
|
#define bmEPEMPTY bmBIT2
|
|
/* Endpoint Status (EP2468STAT) SFR bits */
|
|
#define bmEP8FULL bmBIT7
|
|
#define bmEP8EMPTY bmBIT6
|
|
#define bmEP6FULL bmBIT5
|
|
#define bmEP6EMPTY bmBIT4
|
|
#define bmEP4FULL bmBIT3
|
|
#define bmEP4EMPTY bmBIT2
|
|
#define bmEP2FULL bmBIT1
|
|
#define bmEP2EMPTY bmBIT0
|
|
/* Endpoint Config (EP[2468]CFG) */
|
|
#define bmVALID bmBIT7
|
|
#define bmDIR bmBIT6
|
|
#define bmTYPE (bmBIT4|bmBIT5)
|
|
#define bmTYPE1 bmBIT5
|
|
#define bmTYPE0 bmBIT4
|
|
#define bmSIZE bmBIT3
|
|
/* Endpoint Config (EP[24]CFG) */
|
|
#define bmBUF (bmBIT0|bmBIT1)
|
|
#define bmBUF1 bmBIT1
|
|
#define bmBUF0 bmBIT0
|
|
/* SETUP Data Pointer Auto Mode (SUDPTRCTL) */
|
|
#define bmSDPAUTO bmBIT0
|
|
/* Endpoint Data Toggle Control (TOGCTL) */
|
|
#define bmQUERYTOGGLE bmBIT7
|
|
#define bmSETTOGGLE bmBIT6
|
|
#define bmRESETTOGGLE bmBIT5
|
|
#define bmTOGCTLEPMASK bmBIT3 | bmBIT2 | bmBIT1 | bmBIT0
|
|
/* IBN (In Bulk Nak) enable and request bits (IBNIE/IBNIRQ) */
|
|
#define bmEP8IBN bmBIT5
|
|
#define bmEP6IBN bmBIT4
|
|
#define bmEP4IBN bmBIT3
|
|
#define bmEP2IBN bmBIT2
|
|
#define bmEP1IBN bmBIT1
|
|
#define bmEP0IBN bmBIT0
|
|
|
|
/* PING-NAK enable and request bits (NAKIE/NAKIRQ) */
|
|
#define bmEP8PING bmBIT7
|
|
#define bmEP6PING bmBIT6
|
|
#define bmEP4PING bmBIT5
|
|
#define bmEP2PING bmBIT4
|
|
#define bmEP1PING bmBIT3
|
|
#define bmEP0PING bmBIT2
|
|
#define bmIBN bmBIT0
|
|
|
|
/* Interface Configuration bits (IFCONFIG) */
|
|
#define bmIFCLKSRC bmBIT7
|
|
#define bm3048MHZ bmBIT6
|
|
#define bmIFCLKOE bmBIT5
|
|
#define bmIFCLKPOL bmBIT4
|
|
#define bmASYNC bmBIT3
|
|
#define bmGSTATE bmBIT2
|
|
#define bmIFCFG1 bmBIT1
|
|
#define bmIFCFG0 bmBIT0
|
|
#define bmIFCFGMASK (bmIFCFG0 | bmIFCFG1)
|
|
#define bmIFGPIF bmIFCFG1
|
|
|
|
/* EP 2468 FIFO Configuration bits (EP2FIFOCFG,EP4FIFOCFG,EP6FIFOCFG,EP8FIFOCFG) */
|
|
#define bmINFM bmBIT6
|
|
#define bmOEP bmBIT5
|
|
#define bmAUTOOUT bmBIT4
|
|
#define bmAUTOIN bmBIT3
|
|
#define bmZEROLENIN bmBIT2
|
|
#define bmWORDWIDE bmBIT0
|
|
|
|
/* Chip Revision Control Bits (REVCTL) - used to ebable/disable revision specidic
|
|
features */
|
|
#define bmNOAUTOARM bmBIT1
|
|
#define bmSKIPCOMMIT bmBIT0
|
|
|
|
/* Fifo Reset bits (FIFORESET) */
|
|
#define bmNAKALL bmBIT7
|
|
|
|
/* Chip Feature Register (GPCR2) */
|
|
#define bmFULLSPEEDONLY bmBIT4
|
|
|
|
/* EP 01 status (EP01STAT) */
|
|
#define bmEP1INBSY bmBIT2
|
|
#define bmEP1OUTBSY bmBIT1
|
|
#define bmEP0BSY bmBIT0
|
|
|
|
#endif /* FX2REGS_H */
|