

CORE Generator Options:
   Target Device              : xc6slx45-csg324
   Speed Grade                : -3
   HDL                        : vhdl
   Synthesis Tool             : Foundation_ISE

MIG Output Options:
   Component Name             : ddr2
   No of Controllers          : 1
   Hardware Test Bench           : disabled

    
/*******************************************************/
/*                  Controller 3                       */
/*******************************************************/
Controller Options : 
   Memory                  : DDR2_SDRAM
   Interface               : NATIVE
   Design Clock Frequency  : 3000 ps (333.33 MHz)
   Memory Type             : Components
   Memory Part             : MT47H64M16XX-25E
   Equivalent Part(s)      : MT47H64M16HR-25E
   Row Address             : 13
   Column Address          : 10
   Bank Address            : 3
   Data Mask               : enabled

Memory Options :
   Burst Length                       : 4(010)
   CAS Latency                        : 5
   DQS# Enable                        : Enable
   DLL Enable                         : Enable-Normal
   OCD Operation                      : OCD Exit
   Output Drive Strength              : Fullstrength
   Outputs                            : Enable
   Additive Latency (AL)              : 0
   RDQS Enable                        : Disable
   RTT (nominal) - ODT                : 50ohms       
   High Temparature Self Refresh Rate : Disable

User Interface Parameters :
   Configuration Type     : Four 32-bit bi-directional ports
   Ports Selected         : Port0, Port1, Port2, Port3
   Memory Address Mapping : BANK_ROW_COLUMN

   Arbitration Algorithm  : Round Robin

   Arbitration            : 
      Time Slot0 : 0123
      Time Slot1 : 1230
      Time Slot2 : 2301
      Time Slot3 : 3012
      Time Slot4 : 0123
      Time Slot5 : 1230
      Time Slot6 : 2301
      Time Slot7 : 3012
      Time Slot8 : 0123
      Time Slot9 : 1230
      Time Slot10: 2301
      Time Slot11: 3012

FPGA Options :
   Class for Address and Control       : II
   Class for Data                      : II
   Memory Interface Pin Termination    : CALIB_TERM
   DQ/DQS                              : 25 Ohms
   Bypass Calibration                  : enabled
   Debug Signals for Memory Controller : Disable
   Input Clock Type                    : Single-Ended 
    